One for All URC 4080 - Manual (Page 10)

Archer 0153, 0022, 0797
Belcor 0056
Bell & Howell 0014
Bell South 0899
Cable Star 0056
Cabletenna 0022
Cableview 0022
Century 0153
Citizen 0153, 0315
Colour Voice 0025
Comtronics 0040
Contec
0019
Digi 0637
Eastern 0002
Emerson
0797
Everquest 0015, 0040
Focus 0400
GC Electronics 0056
Garrard 0153
Gemini 0015, 0797
General Instrument 0476, 0276, 0011, 0810
GoldStar 0144, 0040
Goodmind 0797
Hamlin 0020, 0259, 0009, 0034
Hitachi 0011
Hytex 0007
Jasco 0015, 0153, 0315
Jerrold 0003, 0012, 0476, 0276, 0014, 0015, 0011, 0810
Linsay 0440
Memorex 0000
Movie Time 0063
NSC 0063
Novaplex 0618
Oak 0019, 0007
Optimus 0021
Panasonic 0000, 0107, 0021
Panther
0637
Paragon 0000
Philips 0153, 0025
Pioneer 0144, 0533, 0877
Popular Mechanics 0400
Pulsar 0000
Quasar 0000
RCA 0021
Radio Shack 0015, 0315, 0797, 0883
Recoton 0400
Regal 0020, 0259
Regency
0002
Rembrandt 0011
Runco 0000
SL Marx 0040
continued on next page...
19
PROGRAMMING CABLE CONVERTER OR
SATELLITE RECEIVER CONTROL
Locate the brand name of your Cable Converter or Satellite
Receiver in the setup codes section starting below, and
write it in the appropriate space.
Cable Converter Brand: ________________________
or
Satellite Receiver Brand:________________________
The brands are listed in alphabetical order with the most
popular codes listed first. To program component control:
1. Turn on the Cable Converter or Satellite Receiver.
2. On the remote control, press CBL/SAT once.
Press and hold SET until the LED blinks twice,
then release SET.
NOTE: The remote control will exit programming if
more than 10 seconds elapse between key presses.
3. Enter the first four-digit code for your Cable
Converter or Satellite Receiver. If performed
correctly, the LED will blink twice.
NOTE: If the LED emits a long blink, the code is
invalid. Repeat steps 2 through 3 and try entering the
same code again.
4. Aim the remote control at your Cable Converter or
Satellite Receiver and press POWER once.The unit
should turn off.If it does not respond,repeat steps
2-3,trying each code listed for your brand until
you find one that works.If it still does not work ,
try searching for the code (see page 23).
5. Write your Cable Converter or Satellite Receiver
code in the boxes below for future reference.
NOTE: Remember, to use the One For All 4-Device Video Expert
remote control to operate your Cable Converter or Satellite
Receiver, press CBL/SAT first.
Setup Codes for Cable Converters:
ABC 0003, 0008, 0014, 0017, 0007, 0011, 0013
Allegro 0153, 0315
Americast 0899
Antronix 0022
18