Functional overview – Onkyo BD-SP807 User Manual

Page 11

Advertising
background image

11

EN

FUNCTIONAL OVERVIEW

Installing the Batteries in the Remote Control

Install 2 AA (1.5V) batteries matching the polarity
indicated inside battery compartment of the remote
control.

1

Open the cover.

2

Insert batteries.

Make sure to match + and - on the batteries to the
marks indicated in the battery compartment.

3

Close the cover.

Note

Incorrect use of batteries can result in hazards such as
leakage and bursting. Please observe the following:

•

Do not mix new and old batteries together.

•

Do not use different kinds of batteries together.
Although they may look similar, different batteries
may have different voltages.

•

Make sure that the + and - ends of each battery
match the indications in the battery compartment.

•

Remove batteries from battery compartment that is
not going to be used for a month or more.

•

When disposing of used batteries, please comply with
governmental regulations or environmental public
instruction’s rules that apply in your country or area.

•

Do not recharge, short-circuit, heat, burn or
disassemble batteries.

Using a Remote Control

Keep in mind the following when using the remote
control:

•

Make sure that there are no obstacles between the
remote control and the infrared sensor window on the
unit.

•

Remote operation may become unreliable if strong
sunlight or fluorescent light is shining on the infrared
sensor window of the unit.

•

Remote control for different devices can interfere with
each other. Avoid using remote control for other device
located close to the unit.

•

Replace the batteries when you notice a fall off in the
operating range of the remote control.

•

The maximum operable ranges from the unit are as
follows.

BD S 8 7

BD S 8 7

30˚

30˚

Approx. 16 ft. (5 m)

Infrared sensor window

BD-SP807

Advertising