Connections, Connection to an audio system – Onkyo BD-SP807 User Manual

Page 16

Advertising
background image

16

EN

CONNECTIONS

Connection to an Audio System

•

When you change the connections, all devices should be turned off.

•

Refer to the manual accompanying external devices for more information.

2-Channel Analog Audio Connection

AUDIO IN

L

R

analog audio input jacks

RCA audio cable

audio

this unit

AUDIO OUTPUT (DOWN MIX L/R)

stereo system

Digital Audio Connection

DIGITAL AUDIO INPUT

COAXIAL

DIGITAL AUDIO INPUT

OPTICAL

audio

this unit

AUDIO OUTPUT (DIGITAL OPTICAL/COAXIAL)

AV receiver / amplifier

digital audio

optical cable

digital audio
coaxial cable

or

digital audio

optical input jack

digital audio
coaxial input jack

Supplied cables used in this connection are as follows:

• RCA audio cable (L/R) x 1
Please purchase the rest of the necessary cables at your local store.

Note for Digital Audio Optical Cable

•

Digital audio optical cable may be damaged when bent at sharp angles. Endure cables are coiled in loops with a
diameter of 6 inches (15cm) or more when storing them.

•

Use a cable which is 9.8 feet (3m) or shorter.

•

Insert cable plugs firmly into the connectors when making connections.

•

If a plug has dust or is dirty, clean it with a soft cloth before inserting it into a connector.

Note

•

When connecting to a 2-channel audio stereo device, use the AUDIO OUTPUT (DOWN MIX L/R) jacks. If the AUDIO
OUTPUT (ANALOG 7.1ch) jacks are used, set “7.1ch Audio Out” in the “Audio” menu to “2 Channel” (Refer to page
38). For software recorded in multi-channel, analog signals that have been down-mixed into 2 channels are output.
(For sources which are prohibited from down-mixing, only the FRONT L/R signals are output.)

Advertising