Olympus E-PL3 - Manual (Page 85)

85 EN
Customizing camera settings
10
W #Custom MENU c
W
Option Description g
# X-Sync. Choose the shutter speed used when the fl ash fi res. 104
# Slow Limit Choose the slowest shutter speed available when a fl ash is
used.
104
w+F When set to [On], it will be added to the exposure
compensation value and fl ash intensity control will be
performed.
40, 60
X K/Color/WB MENU c
X
Option Description g
Noise Reduct. This function reduces the noise that is generated during long
exposures.
[Auto]: Noise reduction is only performed at slow shutter
speeds.
[On]: Noise reduction is performed with every shot.
[Off]: Noise reduction off.
Noise reduction requires about twice the time needed to
record the image.
Noise reduction turns off automatically during sequential
shooting.
This function may not work effectively with some shooting
conditions or subjects. •
•
•
53
Noise Filter Choose the amount of noise reduction performed at high
ISO sensitivities.
—
WB Choose the white balance mode. 43
All > [All Set]: Use the same white balance compensation in all
modes except [CWB].
[All Reset]: Set white balance compensation for all modes
except [CWB] to 0.
—
W Keep Warm
Color
Select [Off] to eliminate “warm” colors from pictures taken
under incandescent lighting.
—
#+WB Choose a white balance setting for use with the fl ash. —
Color Space You can select how colors are reproduced on the monitor or
printer.
—
Shading Comp. Choose [On] to correct peripheral illumination according to
the type of lens.
Compensation is not available for teleconverters or
extension tubes.
Noise may be visible at the edges of photographs taken at
high ISO sensitivities. •
•
—