Olympus SZ-10 - Manual (Page 17)

17 EN
Date, time, time zone, and language
The date and time set here are saved to image fi le names,
date prints, and other data. You can also choose the
language for the menus and messages displa yed in the
monitor.
1
Press the n button to turn on the
camera.
The date and time setting screen is displayed when
the date and time are not set.
X
Y/M/D
Y M D Time
-- -- -- --
: . .
MENU Cancel
---- ----
Date and time setting screen
2
Use FG to select the year for [Y].
-- -- -- --
: .
Time
MENU Cancel
X
.
Y/M/D
Y M D
2011 2011
3
Press I to save the setting for [Y].
-- -- --
: . .
2011
X
Y/M/D
Y M D Time
MENU Cancel
01 01
●
4
As in Steps 2 and 3, use FGHI to set
[M] (month), [D] (day), [Time] (hours and
minutes), and [Y/M/D] (date order), and then
press the
A button.
For precise time setting, press the A button as the
time signal strikes 00 seconds.
To change the date and time, adjust the setting from
the menu. [ X] (Date/time) (p. 54)
5
Use HI to select the [x] time zone and
then press the A button.
Use FG to turn daylight saving time ([Summer])
on or off.
Summer OK Set
Seoul
Tokyo Seoul
Tokyo
’11.02.26 00:00
The menus can be used to change the selected time
zone. [World Time] (p. 54)
6
Use FGHI to select your language and
press the A button.
The menus can be used to change the selected
language. [l] (p. 53)
Inserting the card
Always use SD/SDHC/SDXC cards or Eye-Fi card
with this camera. Do not insert other types of memory
cards. “Using the card” (p. 66)
This camera can be used without a card by storing
images in its internal memory.
●