Olympus SZ-10 - Manual (Page 33)

33 EN
Taking pictures with [Auto] Taking pictures with [Auto]
1 Press the shutter button to shoot the fi rst frame.
2 Move the camera horizontally. The image is
automatically taken when the subject overlaps the
translucent image that is displayed on the monitor.
Taking pictures with [Manual] Taking pictures with [Manual]
1 Press the shutter button to shoot the fi rst frame.
2 Move the camera in the same way as [Auto] to decide
the position, and then press the shutter button.
The fi rst shot image is displayed on the monitor
lightly. Decide the position by referencing the image.
To exit 3D shooting mode without saving an image,
press the m button.
The [Image Size] (p. 39) is fi xed to [0].
The zoom ratio is fi xed.
The focus, exposure and the white balance are fi xed
when the fi rst image is taken.
The fl ash is fi xed to [ $Flash Off].