Playback of recorded images – Olympus C-370 ZOOM User Manual
Page 129
129
Troubleshooting
9
Mi
sc
el
la
n
eou
s
Playback of recorded images
Possible cause
Corrective action
Ref. Page
Pictures you have taken do not appear on the monitor.
The power is off.
Press the power switch to turn the camera on,
and press the
to switch to the playback
mode.
The camera is in the
shooting mode.
Press the
to switch to the playback mode.
There are no pictures in
the internal memory or
on the card.
NO PICTURE appears on the monitor. Record
pictures.
–
There is a problem with
the card.
Refer to the "Error codes".
The camera is
connected to a TV.
The monitor does not function when the video
cable is connected to the camera.
Single-frame erase and all-frame erase cannot be performed.
The pictures are
protected.
Display the image with the
mark and
select [OFF] from the [
] in the menu to
release the protection.
No picture is displayed on the TV when connected to the camera.
The video output signal
is incorrect.
Set the video output signal according to the
region where used.
The TV video signal
setting is incorrect.
Set the TV to the video input mode.
The picture is out of focus.
The camera moved
when the shutter button
was pressed.
Hold the camera correctly and press the
shutter button gently.
Camera movement occurs easily with slower
shutter speeds. When you take a picture with
the flash off mode in a night scene or a dark
situation, use a tripod, or hold the camera
firmly.
The lens was dirty.
Clean the lens. Use a commercially available
blower blush and then wipe with a Lens
cleaner to remove dust. Mold may form on the
lens surface if the lens is left dirty.
–
The focus may not be
correct even if the green
lamp lights.
Determine the position of the subject after
focusing the camera on an object about the
same distance away as the subject.