If correct focus cannot be obtained, Focus lock), If correct focus cannot be obtained" (p.42) – Olympus C-370 ZOOM User Manual
Page 42
42
3
Shoo
ting
If correct focus cannot be obtained
When the subject to be focused is not on the AF target mark (not positioned
in the center of the composition), you can use the following steps to obtain the
correct focus on the subject. This operation is referred to as "focus lock".
Determine the position of the subject after focusing (Focus Lock)
1
Press the power switch.
• The camera turns on in the shooting
mode.
• The lens extends and the monitor turns
on.
• The orange lamp lights.
2
Turn the mode dial and select a
shooting mode.
3
Position the AF target mark on
the subject you want to focus on.
• When shooting a hard-to-focus
subject, point the camera at an object
about the same distance away as the
subject.
Power switch
Mode dial
Shutter button
AF target mark