Optimus MICRO-39 - Manual (Page 7)

7
Using AC Power
You can power the Micro-39 using an 3V, 300-
mA AC adapter and a size H Adaptaplug
®
(nei-
ther supplied). Both are available at your local
RadioShack store.
Cautions:
You must use a Class 2 power
source that supplies 3V DC and
delivers at least 300 mA. Its cen-
ter tip must be set to negative and its plug
must fit the Micro-39's DC 3V jack. Using
an adapter that does not meet these speci-
fications could damage the Micro-39 or the
adapter.
• Always connect the AC adapter to the
Micro-39 before you connect it to AC
power. When you finish, disconnect the
adapter from AC power before you discon-
nect it from the Micro-39.
Follow these steps to power the Micro-39 from
standard AC power.
!
14-1167.fm Page 7 Thursday, January 20, 2000 2:02 PM