Optimus MICRO-39 - Manual (Page 8)

8
1. Set the AC adapter's voltage switch to 3V if
it is equipped with a voltage selection
switch.
2. Insert the AC adapter’s Adaptaplug into the
AC adapter's cord so it reads TIP–.
3. Insert the adapter’s barrel plug into DC 3V
on the recorder.
Note: Inserting the barrel plug into the
Micro-39's DC 3V jack disconnects the
internal batteries.
4. Plug the adapter’s other end into a stan-
dard AC outlet.
Using Vehicle Battery Power
You can power the Micro-39 from a vehicle’s
12V power source (such as cigarette-lighter
socket) using a 3V, 300-mA DC adapter and a
size H Adaptaplug (neither supplied). Both are
available at your local RadioShack store.
14-1167.fm Page 8 Thursday, January 20, 2000 2:02 PM