Sylvania SRTD420 - Manual (Page 11)

– 11 – EN
0C28
CONNECTING TO FRONT A/V INPUT JACKS
When you watch a program recorded on an another
source (VCR, video camera or Video game system),
use the audio/video input jacks on the front of the
TV/DVD.
Connect the audio/video output
jacks of the source to the AUDIO
L/R and VIDEO jacks of this
TV/DVD. Then press SELECT until
"AUX" appears on the screen.
NOTE:
• When you connect a monaural VCR (another
source) to this TV/DVD, connect the Audio output
jack of the monaural VCR (another source) to the
AUDIO L jack of this TV/DVD. The audio will
distributed in both L and R channel equally.
VIDEO L–AUDIO–R
[Another source]
To the
audio out-
put jacks
Audio/Video
cables
(not supplied)
etc.
To the video
output jack
[Front of the TV/DVD]
AUX
[Fig. 5]
CONNECTING TO AN AMPLIFIER/RECEIVER EQUIPPED WITH
DIGITAL INPUT JACKS (DVD, CD, MP3 sound only)
Use an audio coaxial digital cable available at retail stores for the audio connections.
NOTES:
• The audio source on a disc in a 5.1 channel Dolby Digital surround format cannot be recorded as digital
sound by an MD or DAT deck.
• Be sure to turn off the power to all components in the system before making connections.
• Refer to the Owner's Manuals for the components to be connected to the TV/DVD.
• Set DOLBY DIGITAL to OFF for audio output in the setup mode. Playing a TV/DVD using incorrect set-
tings may generate noise distortion, and may also damage the speakers. (See page 28 to set DOLBY
DIGITAL to OFF.)
• This will only allow 2-channel DVD sound to be listened to on the amplifier.
COAXIAL ANT.
Amplifier/Receiver equipped with
digital input jacks.
To COAXIAL DIGITAL
AUDIO INPUT jack
To DIGITAL AUDIO OUT
(PCM/BITSTREAM)
COAXIAL jack
(only DVD, CD, MP3 AUDIO OUT)
[Fig. 6]
T9005UF(EN).QX3 04.4.12 10:06 AM Page 11