Olympus PER-E01 - Manual (Page 13)

E-3
ቢ Align the threaded section of the PER-E01 with the port mount thread on the PT-E series case.
ባ Hold the PT-E series case firmly with one hand, hold the main body of the PER-E01 with your other hand
and screw it into the PT-E series by turning the PER-E01 clockwise.
ቤ Resistance increases as the PER- E01 is screwed in more deeply. However, be sure to screw it in all the
way until there is no gap visible below the threaded section of the PER-E01.
Screw in until
there is no gap.
ብ Align the threaded section of the PER-01 with the port mount thread on the PPO-E series lens port.
ቦ Hold the PT-E series case and PER-E01 firmly with one hand, hold the main body of the PPO-E series
lens port with other hand and turn it clockwise to screw it into the PER-E01.
ቧ Resistance will increase as the PPO-E series lens port is screwed in However, be sure to screw it in all the
way until there is no gap visible between the PER-E01’s threaded section and the PPO-E’s port mount thread.
Screw in until
there is no gap.