Onkyo DV-CP706 - Manual (Page 49)

49
Configuring the DV-CP706 —Continued
HDMI Control
With this setting, you can turn RIHD control over HDMI
on or off.
On (default): RIHD control on.
Off: RIHD control off.
Notes:
• RIHD (Remote Interactive over HDMI) is Onkyo’s
implementation of CEC (Consumer Electronics Con-
trol), which allows integrated system control over
HDMI and is part of the HDMI standard. In addition
to Onkyo AV components, it allows interoperability
with CEC-compatible AV components and TVs made
by other manufacturers. However, operation with
components other than RIHD-compatible components
or recommended components cannot be guaranteed.
• Select Off if a connected component is incompatible
or you’re not sure about its compatibility.
• If operation is unreliable when set to On, select Off
instead.
Power Control
With this setting, you can turn RIHD power control over
HDMI on or off.
On (default): RIHD power control on.
Off: RIHD power control off.
Notes:
• The Power Control setting can be set only when the
HDMI Control setting is set to On.
• When set to On, the DV-CP706 can be turned on or off
automatically along with the other RIHD-compatible
components in the system.
• HDMI power control only works with RIHD-compat-
ible components that support it and may not work
properly with some components due to their settings
or compatibility.
• When set to On, the DV-CP706 consumes more
power.
• When set to On, the DV-CP706 enters Standby mode
and the STANDBY indicator lights up.
Direct Change
With this setting, you can turn RIHD direct change over
HDMI on or off.
On (default): RIHD direct change on.
Off: RIHD direct change off.
Notes:
• The Direct Change setting can be set only when the
HDMI Control setting is set to On.
• When set to On, when playback is started on the
DV-CP706, it will automatically be selected as the
input source on an RIHD-compatible TV or AV
receiver.
• HDMI direct change only works with RIHD-compati-
ble components that support it and may not work prop-
erly with some components due to their settings or
compatibility.
Auto Power Off
The Auto power off function automatically turns off the
DV-CP706 after 20 minutes of inactivity.
This menu appears automatically the very first time you
turn on the DV-CP706. See “First Time Setup” on
page 23 for more information.
TV Shape—see page 44
HDMI Output Setting—see page 45
On-Screen Language—see page 47
This section explains how to select other languages for
disc menus, audio, and subtitles.
Initial Setup Menu
Selecting Other Languages
1 Select “Others” from the Disc
Menu Language, Audio Lan-
guage, or Subtitle menu, and
then press [ENTER].
The language code boxes appear.
2 Use the remote controller’s Left/
Right [ ]/[ ] buttons to select the
code boxes.
Use the Up/Down [ ]/[ ] buttons
to enter a language code.
See adjacent table for language codes.
3 When you’ve finished, press the
[ENTER] button.
Remote controller
Remote controller
Remote controller