Oki B6250 - Manual (Page 108)

B6250 User’s Guide> 108
Message List
Message List (alphabetical order)
This section describes the messages displayed on the control panel.
Message Condition/Reason/Action
Bad Action Format error.
Bad Action Str Missing or bad action defined for job.
Bad BUFSIZE Cmd Format error on BUFSIZE command.
Bad COLUMN Cmd Format error on COLUMN command.
Bad FEntry CMD Unrecognized Form Entry command.
Bad FORMLINES Format error on FORMLINES command.
Bad Header Cmd Unrecognized Header command.
Bad LINE Cmd Format error on LINE command.
Bad PAGE Cmd Format error on PAGE command.
Bad PORT Cmd Format error on PORT command.
Bad Target Str TARGET string format error.
Bad TEntry CMD Unrecognized Target Entry command.
Call Service Help message used for service-type errors.
Cancel Job Confirmation prompt used when CANCEL is pressed.
Canceling Job An operator-requested Cancel is in progress.
Clock Not Set Real Time Clock has not bee initialized.
Close Duplexer Recovery message displayed when duplex door is open.
Close Rear Cover Recovery message displayed when rear cover is open.
Close Top Cover Recovery message displayed when top cover is open.
Code FLASH Error Defective Code Flash - user forced into Firmware
Upgrade.
Command Format Bad command format.
Completed Display for the files status.
Cover Open Recovery action displayed when cover is open