Olympus X-300 EN User Manual
Page 120
119
Troubleshooting
8
Mi
sce
lla
n
eo
us
There is a problem
with the card.
Refer to the "Error codes".
The flash does not fire.
Possible cause
Corrective action
Ref. Page
The flash is set to the
flash off mode.
Select a flash mode other than flash off.
The subject is
illuminated.
If you want the flash to fire on a brightly
illuminated subject, set the flash to fill-in mode.
Sequential shooting or
movie mode is set.
The flash does not fire in the sequential shooting
or movie mode.
Set
in the DRIVE menu.
Panorama mode is set. The flash does not fire in the panorama mode.
Cancel the panorama mode.
The green and orange lamps on the right of the viewfinder blink simultaneously.
Possible cause
Corrective action
Ref. Page
The batteries are
exhausted.
Replace the batteries with new ones.
The monitor does not turn on.
Possible cause
Corrective action
Ref. Page
The camera is in the
sleep mode.
Operate the camera (press the shutter button or
the zoom lever etc.).
The camera is taking
pictures in sequence.
During sequential shooting, the subject does not
appear on the monitor.