Olympus X-300 EN - Manual (Page 96)

95
INDEX - Creating an index
5
Pl
ay
ba
ck
6
Select the last frame of the index.
As in Step 5, press the arrow pad to play
back the movie until the picture that you
want as the last frame is displayed in the
green frame, and press
.
7
Press to select OK, and
press .
• The 9 frames extracted from the movie
appear as an index display, and the
camera returns to the playback mode. The
index is stored as a new picture.
• If you want to select the frames again,
select RESET and press and repeat
the procedure from Step 5.
• To cancel the index function, select CANCEL and press .
TIPS
• The index is stored as a still picture in a different record mode from the
original movie.
• The interval between the frames that are automatically picked out varies
depending on the recording time of the movie.
• An index consists of 9 frames.
• You cannot create an index if there is insufficient memory space on the
card.
Record mode when the movie is
shot Record mode when stored as
an index
HQ SQ1 (1024 x 768 pixels)
SQ SQ2 (640 x 480 pixels)
OK
GO SELECt
OK
RESEt
INDEX
CANCEL
Note