Onkyo DV-SP300 - Manual (Page 35)

35
Digital Audio Out
VCD CD DVD
This sets the type of audio output from the digital audio output jack.
PCM: Select when connected to a 2 channel digital stereo
amplifier (see page 16).
The DVD Player outputs sounds in the PCM format
when you play a DVD-Video disc recorded on the
Dolby Digital.
The DVD Player does not output sounds in the
PCM format when you play a DVD-Video disc
recorded on the DTS recording system.
Dolby Digital: Select when you connected to an amplifier equipped
with a Dolby Digital decorder (see page 16).
The DVD Player outputs digital audio information
in the Dolby Digital format when you play a DVD-
Video recorded in the Dolby Digital recording
system.
The DVD Player does not output sounds in the
PCM format when you play a DVD-Video disc
recorded on the DTS recording system.
DTS: Select when you connected to an amplifier equipped
with a DTS decorder (see page 16).
The DVD Player outputs digital audio information
in the DTS format when you play a DVD-Video
recorded in the DTS recording system.
The DVD Player outputs sounds in the Dolby
Digital format when you play a DVD-Video disc
recorded on the Dolby Digital recording system.
Dolby Digital and DTS
The 5.1-channel digital surround format of DOLBY DIGITAL/DTS enables
you to individually play five full-range (20 Hz-20 kHz) channels (left and
right front, center, two surround channels) plus an LFE (Low Frequency
Effect) channel for the low-range effect sound. It will create a realistic sound
as heard in theaters and concert halls.
DOLBY DIGITAL Surround
DVD Video that have the
D I G I T A L
mark are recorded using this system.
DTS Surround
DVD Video and CD that have the mark are recorded using this system.
Important: DTS information
If you set the Digital Audio Out setting to DTS, you must have your DVD
Player connected to a receiver or decoder with the DTS feature and the disc
you play must support the DTS audio format. If you choose DTS and your
receiver, decoder or disc doesn’t support DTS, you won’t hear any audio
when you play the disc.
Linear PCM
VCD CD DVD
96KHz ⇒ 48KHz:
Even in case of 96 kHz digital signal, the
DVD Player will deliver 48 kHz signal out.
96KHz ⇒ 96KHz: In case of 96 kHz digital signal, the DVD
Player will deliver 96 kHz signal out. In this
case, your receiver should control 96 kHz
signal.
Audio Setting (continued)
Customizing the Settings