Olympus 2004 - Manual (Page 128)

128
Selecting functions from the SETUP menu
7
Using y
our camera eff
ectivel
y
With the cursor on SET, press
MENU/OK. The clock starts after completing
step .
The time is displayed in the 24-hour
format. For example, 2 p.m. will be
displayed as 14:00.
07 07 30 30
SET SET 12 12 00 00
CANCEL SELECT GO BACK OK
Repeat the procedure until the date
and time are completely set.
● The current date/time settings are retained even when the power is turned off.
● The date/time settings will be canceled and the factory default settings will be
restored if the camera is left with no battery for approximately 1 day. The
settings will be canceled more quickly if the battery was only loaded in the
camera for a short time before being removed. After loading the battery, check
that the date/time settings are correct.
● If the date/time settings have been canceled, the warning message appears on
the monitor when the camera is powered on.
~
“Error codes” (P. 192)
Date/Time Setting Cautions
Rotate to
select
MENU/OK
Press to confirm