Olympus 2004 - Manual (Page 199)

12
Miscellaneous
199
Troubleshooting
The camera is not recognized by the printer.
Possible cause
PC was selected in the USB
connection menu after
connecting to the printer with
a USB cable.
The printer is not compatible
with PictBridge.
Corrective action
Disconnect the USB cable from the camera and
start again from the beginning.
Refer to the printer’s instruction manual, or
consult the printer’s manufacturer.
Ref. Page
P. 147
P. 146
ⅷ Connection to a PC or Printer
The camera is not recognized by the PC.
Possible cause
The USB driver has not
been installed.
The power is off.
Corrective action
It is necessary to install the USB driver for
Windows 98/98 SE.
Press the POWER switch to turn the camera
on.
Ref. Page
P. 176
P. 30