Quatech QSC-100 - Manual (Page 23)

The QTPCI program is capable only of displaying the PCI configuration. It
cannot be used to make changes.
Q - Quatech PCI adapters
N - Other PCI devices
X - EXIT M - Change to Expert Mode
Quatech PCI Configuration Information Display Software
Version 1.00
INSTRUCTIONS:
------------------------
Press keys listed in the menu at the bottom of the screen.
This program only displays information. It cannot make changes.
PCI BIOS detected, version 2.10
Quatech PCI adapters detected
---------------------------------------------
QSC-100 Four-port RS-232 adapter (Hardware Revision A1)
Uses IRQ 11
Base addr 1 = 0xff80 I/O
_
Numbers preceeded by "0x" are hexadecimal.
Figure 14 --- QTPCI.EXE Basic Mode display
Figure 14 shows the Expert Mode display for the QSC-100 after the "Q" key has
been pressed. The information from the Basic Mode display is presented along with
more details such as the Vendor and Device IDs, PCI Class Code, size of memory and
I/O regions, etc. Pressing the "N" key will show similar information for all
Quatech QSC-100 User's Manual 21