Quantum Data 822S - Manual (Page 11)

68-00183 Rev. C Quantum Data, Inc. Page 11
User Interface
Front Panel:
16 x 2 character LCD
LED backlight
Format & image selector knobs
Invert, video gate, sync gate, output on/off buttons
MS-Windows 95/98, NT:
Virtual front panel
Format, image& sequence editors
File management
Configure (start-up) file editor
MS-DOS Command line:
Terminal emulator for interacting directly with the
822S
Computer Interface
Provided code necessary to connect the 822S to your
(ATE) application program:
MS-Windows 95/98, NT DLL:
A DLL is supplied that lets you use the 822S’
extensive command library in your MS- Windows®
application.
MS-DOS Driver:
Use the 822S’ command library in your MS-DOS
application.
MS-DOS Send utility:
For sending command files that customize the 822S
for your application.
C source code:
Complete C source code is supplied that lets you
use the 822S’ command library in
your C application.
Computer Ports
GPIB INTERFACE
Protocol: IEEE-488.2
Connector: 24 position microribbon
SERIAL INTERFACE
Type: RS-232C
Baud Rates: 300 thru 38,400
Data: 7, 8
Stop: 1, 2
Parity: none, odd, even
Handshake: none, RTS/CTS
Custom Formats
Storage: 300 + built-in formats
Edit method: with VGM software
Miscellaneous
AC MAINS
Frequency: 48 to 440 Hz Sinusoidal
Voltage: 85 - 264 VAC (standard as shipped)
Power: 300 watts
WEIGHT / SIZE
Unpacked: Approx 50.0 lbs. / 7 x 17 x 19 in.
Supplied Cables & Adaptors
One- 1 meter long 50 Ohm SMA - BNC cable
Part # 30-00134
One - 50 Ohm SMA Terminator (used to terminate
unused output for differential output operation)
Part# 30-00135
Available Options
150 Ohm BNC Feedthrough (used to terminate the
generator’s 50 Ohm output to a display having a 75
Ohm input impedance)
Part# 30-00136
50 Ohm BNC Feedthrough (used to terminate the
generator’s 50 Ohm output to the self calibration
inputs). Two required.
Part# 30-00137
Specifications
(continued)