Quantum Data 822S - Manual (Page 2)

Page 2 Model 822S Quick Start Guide
Making Connections
(Power & Test Signals)
AC Mains
Input & Switch
85 - 264 VAC
48 - 440 Hz Sine
300 Watts Max.
Analog Video Output
50 Ohm Differential
Analog Output Level
Calibration Inputs
Blank module for Model 822S
Video Module - Monochrome Output
Blank module for Model 822S
Vertical and Horizontal
Sync Outputs (75 Ohm - TTL)
Composite Sync Output
(75 Ohm - TTL)
User positionable Frame Sync
Output (75 Ohm - TTL) Pixel Clock Outputs
50 Ohm Differential ECL
Start of Line Pulse Output
75 Ohm - TTL Level
Start of Frame Pulse Output
75 Ohm - TTL Level
NOTES:
1) AC Mains power must be turned off while removing or installing any module. Failure to do so
may cause damage to the mainframe and/or module. Such damage is not covered by the
product or service warranties.
2) All modules contain electrostatic sensitive components. Proper static prevention measures
must be followed while handling the modules.
3) The Main Module must always be used in the bottom most slot of the mainframe.
4) The Sync Module must always be used in the second slot from the bottom of the mainframe.
Rear View of
Model 822S