QUASAR SP3234 - Manual (Page 7)

7
P ICTURE I N P ICTURE (PIP) O PERATION
Picture In Picture (PIP) Operation
PIP Operation with a VCR and Cable Box
This television includes a Picture In Picture (PIP) feature. A second video
source (VCR, Camcorder, etc.) is required to provide a second picture.
Connect your television to a VCR and Cable Box, as shown.
Note: The remote control must be programmed with supplied
codes to operate the VCR and Cable Box. See
Programming the Remote Control
in the Remote
Control Quick Reference Guide.
Procedure
Press the PIP button on the remote control to display the PIP frame.
Note: The PIP picture is the same as the main picture, initially.
To view a different picture in the PIP frame:
• Press the TV/VIDEO button on the remote control to select
the video PIP source.
• Verify the CABLE BOX and VCR are ON and the VCR tuned
to channel 3.
• Choose channels for the PIP frame by pressing the CABLE
button on the remote control and using the numeric keypad
or CH up/down buttons.
• Choose channels for the Main Picture by pressing the TV
button on the remote control and using the numeric keypad
or CH up/down buttons.
TERMINALS ON BACK OF TV
VCR CABLE BOX
AUDIO OUT
VIDEO OUT
L
R
ANT INPUT
ANT OUTPUT ANT INPUT
Cable Splitter
(Not Supplied)
Incoming
Cable
CABLES NOT SUPPLIED
ANT
L R
TO AUDIO
AMP
VIDEO AUDIO
2
INPUT
1
S-VIDEO
S-VIDEO OUT
SWAP Button
The SWAP button switches the PIP and Main
Picture source. Press the RECALL button for on
screen PIP and Main Picture source status.
Turn the VCR OFF and tune TV to channel 3.
0374E-1prod.fm Page 7 Monday, February 26, 2001 4:40 PM