Quantum DLTSageTM Tape Security PX500 Series - Manual (Page 2)

PX500 Series DLTSage™ Tape Security Quick Start Guide
2
disable Secure Capable Drives for reading and writing
data to and from tapes using the Secure Key.
When a user is created with administrator privileges (other
than the default admin user), the Create Secure User
section appears at the bottom of the Users page (see
figure 1 ).
Figure 1 Create Secure User
To create a secure user:
There is only one Secure User and the username is always
skadmin
.
1 Enter a secure password.
2 Verify the secure password by entering the password a
second time in the Verify Password box.
3 Click Create to create the Secure Key password.
Once the Secure Key administrator password is added,
the Remove Secure User section displays at the
bottom of the Users page (see
figure 2 ).
Figure 2 Remove Secure User
To update the Secure Key password:
N OTE : Only users with administrator privileges (other
than the default administrator) can create a
secure user.
N OTE : Secure Passwords must be alphanumeric
strings of at least one character. A blank
secure password will be rejected. Secure
Password
and Verify Password must
match.
N OTE : Only the Secure User can change the secure user
password.
1 Enter a secure password.
2 Verify the secure password by entering the password a
second time in the Verify Password box.
3 Click Update to update the Secure Key password.
The Secure Key password is updated.
Creating a Secure Key
0
The Secure Key tab displays when a secure user has been
added to the library and the secure user is logged in.
To access the Secure Key page, from the Setup page, click
on the Secure Key tab at the top of the page.
The Secure Key page displays (see
figure 3 ).
N OTE : Secure Passwords must be alphanumeric
strings of at least one character. A blank
secure password will be rejected. Secure
Password
and Verify Password must
match.
N OTE : When logging on as a secure user, the IP address
entered in the address line of the internet browser
uses https, not the common http. Example:
https://<ip address>