Quatech Wireless A/V Sender 2.4GHz - Manual (Page 5)

4
2.1 Connect the Receiver to a TV
A/V Connect – for TV with A/V Input Jacks
Connect the mini-plug of the provided A/V cables to the A/V jack on the
rear of the receiver; connect the other end of the cable to the A/V jacks
on the TV labeled AUDIO/VIDEO IN. See Fig. 6.
RF Connection – for TV without A/V Input Jacks
If there is no A/V input jacks on your TV, you will need to get an RF
modulator (available at your local electronics store) to make the
connection between TV and receiver. See Fig. 7.
TV
VIDEO AUDIO IN
Receiver A/V Cable
Fig. 6
Fig. 7
VHF/UHF
TV
RF OUT
RF Modulator
CH 3/4
VIDEO AUDIO IN
Receiver
A/V Cable