Quatech Wireless A/V Sender 2.4GHz - Manual (Page 6)

5
Note 1: Connect the yellow plug to the jack labeled VIDEO, the red plug
to the jack labeled AUDIO RIGHT and the white plug to the jack labeled
AUDIO LEFT.
Note 2: If the TV has only one input for audio (mono sound only),
connect the white plug to that single audio in jack.
2.2 Power Supply
a. Plug one end of the provided power adaptor into a wall outlet and
the other end into the rear of the receiver. See Fig. 8.
b. Turn on the receiver. The LED on the front of the unit should light
up.
Fig. 8
Wall Outlet
Receiver
POWER
ON-OFF