QUASAR V V-1303B - Manual (Page 23)

Advanced Operation
23
VIDEO IN AUDIO IN
POWER VOL CH STOP/EJECT REW/ PLAY/REPEAT FF/ REC TIMER
ACTION
REC ON TIMER PROG TIMER
Auto Operation Functions
Tape Position Display
Press TAPE POSITION to detect
current tape position. 1
DETECT I NG TAPE POS I T I ON
2
■ ■ ■ ■ ■ Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
=> Power turns off
• This feature is canceled if any button is
pressed during above mode.
■ ■ ■ ■ ■ Auto Playback
Insert a tape in Power off mode
=> Power turns on
• Playback begins if tape has no record tab.
■ ■ ■ ■ ■ Auto Rewind (except for Recording)
Tape reaches its end
=> Rewind => Stop
■ ■ ■ ■ ■ Playback Auto Eject (Repeat Play is “OFF”)
Tape with no record tab reaches its end
Rewind => Stop => Eject
• “DETECTING TAPE POSITION”
is displayed only when a
cassette is first inserted and it
takes several seconds for
correct tape position to appear.
• The present tape position
indication and amount of tape
remaining (according to tape
speed) is displayed.
• Tape remaining time display may
not be precise.
Press TAPE POSITION (or wait 5
seconds) to return to the normal screen.
• This function cannot display exact amount of
tape remaining for tapes 30 minutes or less, or
for tapes over 120 minutes in length.
Note
REW
FF
<Model VV-2003A unit shown>
To find out present tape position and amount of tape
remaining.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
SELECT/SET
:CH UP
:CH DOWN
:VOL UP
:VOL DOWN
SEARCH
FF
REW
TAPE
POSITION
NUMBER
Keys
BEG I N END
SLP
R 120 MIN.