Qualcomm GSP-1600 - Manual (Page 66)

System Menu
58
To set the NAM
1. From standby mode with Auto NAM set to “no,” press menu .
2. Press for System.
3. Press for NAM Select.
4. Press for Set NAM.
5. Scroll to select the NAM.
6. Press ok .
To set the system
1. Select the appropriate NAM (see NAM Select, page 57).
2. From standby mode, press menu .
3. Press for System.
4. Press for NAM Select.
5. Press for Set System.
6. Scroll to select one of the following:
■ Automatic – Use home system, but if not found use another system
■ No Roaming – Use only the home system
■ A only – Use cellular “A” system only
■ B only – Use cellular “B” system only
My Numbers
You can display your three phone numbers (NAMs) and service provider
name. (The NAMs are entered by your service provider. See NAM Select,
page 57.)
To display your three phone numbers
1. From standby mode, press menu
2. Press for My Numbers.
3. Scroll to select one of the following:
■ PhoneNo 1 – Displays cellular phone number
■ PhoneNo 2 – Displays cellular phone number
■ PhoneNo G* – Displays Globalstar satellite phone number