Quadra-Fire QVI30S - Manual (Page 22)

Quadra-Fire • QVI30S, QVI35S • 340-901 Rev. i • 6/09
22
Log Set Assembly: LOGS-QVI30 F. Positioning the Logs
CAUTION: Logs are fragile! Carefully remove
the logs from the packaging.
If the gas logs have been factory installed they should not
need to be positioned. If the logs have been packaged
separately, refer to the following instructions.
Log #1 SRV340-701): Place log #1 in the back on the insert. Locate the legs of the log outside the 3/8” tabs to either side
of the burner. Pull the log forward until the log is stopped by the back edge of the burner. The log should be centered.
340-935 2/02
1 1
2 2
5 5
4 4
3 3
6 6 7 7
PILOT PILOT BASEPAN BASEPAN
BURNER BURNER
1 1
1 1