QSC Audio Amplifier Network Monitor CM16a - Manual (Page 4)

CAUTION: To reduce the risk of electric shock, do not remove the cover.
No user-serviceable parts inside. Refer servicing to qualified service
personnel.
WARNING: To prevent fire or electric shock, do not expose this equip-
ment to rain or moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal
safety. Improper use can result in potential electrical shock or fire hazards. In order not to defeat the safeguards, observe
the following instructions for its installation, use and servicing.
Federal Communications
Commission (FCC)
Information
NOTE: This equipment has been tested
and found to comply with the limits for a
Class A digital device, pursuant to Part 15
of the FCC Rules. These limits are de-
signed to provide reasonable protection
against harmful interference in a commer-
cial installation. This equipment gener-
ates, uses, and can radiate radio frequency
energy and, if not installed and used in
accordance with the instructions, may
cause harmful interference to radio com-
munications. Operation of this equipment
in a residential area is likely to cause
harmful interference, in which case the
user will be required to correct the inter-
ference at his or her own expense.
4
The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of
uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of
electric shock to humans.
The exclamation point within an equilateral triangle is intended to alert the users to the presence of important operating and
maintenance (servicing) instructions in the literature accompanying the product.
Explanation of Graphical Symbols
1- Maximum operating ambient temperature is 50°C
(122°F).
2- Never restrict airflow through the device fan or vents.
Please insure that the air intake and exhaust vents are unob-
structed.
3- When installing equipment into rack, distribute the
units evenly. Otherwise, hazardous conditions could be
created by an uneven weight distribution.
4- Connect the unit only to a properly rated supply circuit.
The CM16a is suitable for connection to 100 - 240 VAC, 47 - 440
hertz, with no special considerations other than the appropriate
IEC power cord.
5- Reliable Earthing (Grounding) of rack-mounted equip-
ment should be maintained.
Important Safety Information! Please review the following important
safety information before operating the CM16a.