Qwest S1 - Manual (Page 122)

108 Section 2H: Using Your Phone’s Voice Services
Programming Voice Dial Tags
To program a voice dial tag:
1. Press > Tools > Voice Services > Voice Tag > Program.
2. You will be prompted to say the name you want to program. Say the
name after the beep.
3. Respond to the prompt by repeating the name after the beep.
4. Select the voice dial entry (name) in the Contacts list and press .
5. Select your desired phone number and press . (The display shows
“Voice Tag Recorded.”)
Reviewing Voice Dial Tags
To review voice dial tags:
1. Press > Tools > Voice Services > Voice Tag.
2. Select Review or Rev.:Speaker.
3. Select the desired entry and press Options (right softkey).Then
highlight your desired option and press
.
Ⅲ Play to play the recorded voice dial tag.
Ⅲ Speaker on to play the recorded voice dial tag in speakerphone
mode. (If you are in speakerphone mode, the option will appear as
Speaker Off to deactivate the speakerphone mode.)
Ⅲ Erase to erase the recorded voice dial tag. Select Yes to erase;
select No to cancel.
Tip To erase all voice dial tags you have recorded, please press Menu > Tools
> Voice Services > Voice Tag > Erase All > Yes .
Tip Record voice dial tags in a quiet environment.