Qwest S1 - Manual (Page 39)

Section 2A: Phone Basics 25
Answering Calls
1. Make sure your phone is on. (If your phone is off, incoming calls go to
voicemail.)
2. Press to answer an incoming call. (Depending on your phone’s
settings, you may also answer incoming calls by pressing any number
key. See “Setting Any Key Answer” on page 62 for more information.)
Your phone notifies you of incoming calls in the following ways:
ⅷ The phone rings or vibrates.
ⅷ The indicator light flashes.
ⅷ The backlight illuminates.
ⅷ The screen displays an incoming call message.
If the incoming call is from a number stored in your Contacts, the entry’s
name is displayed. The caller’s phone number may also be displayed, if
available.
When receiving a call, the following options are also displayed by pressing
Options (right softkey). To select an option, highlight it and press
.
ⅷ Call Guard to answer the call when you are in roaming mode. (See
“Using Call Guard” on page 79.)
ⅷ Answer or Answer:Speaker to answer the call.
ⅷ Select Audio to switch the call to your desired device (if available).
ⅷ Answer on Hold to put the call on hold.
ⅷ Screen Call to answer the call by using a prerecorded announcement.
(See “Setting Up Screen Call” on page 111.)
ⅷ Quiet Ringer to mute the ringer (if available).
Phone Basics