Using this document – Quatech AirborneDirect WLNG-ET Series User Manual
Page 10
Introduction
Page 4
AirborneDirect™ Ethernet Bridge User's Guide
100-8007-141G
Quatech, Inc. Confidential
TT
USING THIS DOCUMENT
TT
In addition to this chapter, this guide contains the following chapters and appendixes:
Chapter 2, Hardware Installation
⎯ describes the AirborneDirect™ Ethernet Bridge
hardware and how to install it.
Chapter 3, Initial Configuration
⎯ describes how to configure the AirborneDirect™
Ethernet Bridge on your network
Chapter 4, Using the Airborne Control Center (ACC)
⎯ describes how to use the
Windows-based application to configure, manage, and view the status of the
AirborneDirect™ Ethernet Bridge.
Chapter 5, Troubleshooting
⎯ provides troubleshooting suggestions in the unlikely event
you encounter a problem using the AirborneDirect™ Ethernet Bridge.
Appendix A, Specifications
⎯ lists the AirborneDirect™ Ethernet Bridge specifications.
Appendix B, FCC Compliance
⎯ contains FCC compliance information.
Appendix C, Glossary
⎯ defines the terms associated with the AirborneDirect™
Ethernet Bridge and wireless networks in general.
TT
For convenience, an Index appears at the end of this guide.