5842_5844_multiportrouter_may07_final 3, A sophisticated product architecture – Quick Eagle Networks 5844 User Manual

Page 2

Advertising
background image

The 5842 and 5844 Multiport Routers provide the following features:

Support for a wide variety of WAN protocols such as PPP, Frame Relay, Multilink PPP,
Multilink Frame Relay FRF.16.1, and MAC Learning Bridging for point-to-point and point-
to-multipoint applications to the Internet, private or public Frame Relay networks

Advanced IP / Frame Relay Router capabilities with:

• Standard-based IP-over-Frame Relay encapsulation, RFC-2427 compliant

• Link Management Interface (LMI): ANSI AnnexD, ITU Annex A, and FRF Rev 1.0

• Static and dynamic configuration of up to 1024 DLCIs

• Static and dynamic mapping of DLCI to IP Subnets using InverseARP

Dynamic routing protocols RIP1, RIP2, OSPF, and optional BGP-4 (I-BGP and E-BGP)

Dynamic load balancing, using OSPF or optional BGP-4 (I-BGP and E-BGP)

Optional DiffServ-compliant QoS capabilities:

• Ability to assign maximum bandwidth to each traffic class

• Traffic metering, shapes or drops “out-of-profile” traffic

• Prevents lower classes of traffic from being bandwidth starved

• Enables QoS per routing interface in incoming and outgoing direction

• Novice user configuration with presets; advanced user to optimize resources and

throughput; statistics reports on QoS

Network Address Translation (NAT) and port translation (NAPT)

Remote configuration and management through Telnet (Terminal User Interface menus),
Command Line Interface (CLI), and SNMPv3

MAC Bridging features: VLAN MPLS tag transparency

Basic device configuration and T1/E1 loopback diagnostics through front panel

Full range of network performance monitoring and troubleshooting features that enable
you to accurately measure end-to-end performance of the network, including RMON-1
statistics, RMON-2 applications and protocol monitoring, and Frame Relay SLA FRF.13.

Multilink Frame Relay (FRF.16.1) and MLPPP (RFC1990) support

Stateful Inspection Firewall with TCP, UDP, ICMP, DNS, SMTP, FTP, and HTTP protocol
handling capabilities

Menu access for layer-3 and above statistics

Multiple multilink bundles and support of MLPPP / MLFR bundle classes A, B & C

Support of DHCP server and DHCP relay agent

A sophisticated product architecture.

Advertising
This manual is related to the following products: