English 11.2 procedure – Topcom BPM WRIST 2501 User Manual
Page 11
11
TOPCOM BPM WRIST 2501
ENGLISH
11.2
PROCEDURE
1.
Press the POWER button. All digits
will light up, checking the display
functions. The checking procedure
will complete after about 2 sec-
onds.
2.
After all symbols appear, the dis-
play will show "0" with the desig-
nated Memory Zone.
3.
After initialisation the monitor auto-
matically inflates the cuff to approx-
imately 180 mmHg. The
measurement will begin.
4.
When the measurement is com-
pleted, systolic, diastolic and pulse
will be shown simultaneously on
the LCD screen.
When a mistake was detected
during measurement the Error
mark appears on the display
This monitor will re-inflate
automatically to approximately
220mmHg if the system
detects that your body needs
more pressure to measure
your blood pressure.
mon.
d
PM
AM
mem.
mon.
d
PM
AM
mem.
mon.
d
PM
AM
mem.
mon.
d
PM
AM
mem.