Topcom BPM WRIST 2501 - Manual (Page 12)

12
TOPCOM BPM WRIST 2501
12 MEMORY
The BPM 2501 has two Memory zones. Each can
store up to 50 measurements including the date
and time
The result will be stored automatically in the
selected Memory Zone after the measurement.
Select the desires Memory Zone before
measurement.
• Press the MEMORY ZONE button to acti-
vate the display. The actual selected
Memory Zone is displayed.
• Press the Memory Zone button again to
select the memory zone 1 or 2 in which
you want to store the measurement result.
• Press the POWER button to switch the
unit off.
To recall measurement results:
• Press the MEMO button to activate the
display.
• Press the MEMORY ZONE button to
select the memory zone 1 or 2 from which
you want to recall the measurement result.
• Press the MEMO button to confirm. The
calculated avarage of all measurement
together is displayed.
• Press the MEMO button again to see the
last measurement result.
• Press the MEMO successively for prior
values stored.
mon. d PM
AM
mem.
mon. d PM
AM
mem.
When the batteries are installed, the data in the memories
will not be lost even when the Blood Pressure Monitor is
switched off.
Remove the batteries for more than 10 seconds to erase the
memories.