Texas Instruments CDCM7005 - Manual (Page 5)

Related Documentation From Texas Instruments
iii
Preface
Read This First
About This Manual
This manual explains how to use the CDCM7005 evaluation module (EVM)
and provides guidelines to build the customer’s own systems. The manual
includes schematics, layout, bill of materials, and a software description.
How to Use This Manual
This document contains the following chapters:
- Chapter 1—Introduction
- Chapter 2—Quick Start
- Chapter 3—EVM Hardware
- Chapter 4—Serial Peripheral Interface (SPI) Software
- Chapter 5—Schematics, Board Layout, and Parts List
Related Documentation From Texas Instruments
- CDCM7005 Data Sheet, SCAS793, Texas Instruments
FCC Warning
This equipment is intended for use in a laboratory test environment only. It
generates, uses, and can radiate radio frequency energy and has not been
tested for compliance with the limits of computing devices pursuant to subpart
J of part 15 of FCC rules, which are designed to provide reasonable protection
against radio frequency interference. Operation of this equipment in other
environments may cause interference with radio communications, in which
case the user at his own expense will be required to take whatever measures
may be required to correct this interference.
If You Need Assistance. . .
If you need assitance with this device, please email
[email protected]