Teac WAP-4500 - Manual (Page 8)

4. BRC Battery installation
The BRC is powered by two “Mignon“ AA batteries. A fresth set of batteries can
achieve several weeks of normal usage (base settings) thanks to the integrated
energy saving functions of the WAP-4500 BRC.
We do recommend to utilize common Alkaline Batteries.
●
The Battery compartment is placed at the back of the BRC cabinet.
●
The battery cover slider can be unlocked by slight pushing the cover at the
dotted area and shifting down for apprx. 5mm. After unlocking, the cover
can easily be removed.
●
Please care to insert the batteries according to the markings in the battery
case and on the batteries itself. Wrong polarity might damage the BRC.
●
Then lay the battery cover back on the opening and slide-in until you
recognize it was locked again.
●
The BRC now is ready to use.
Note: It is possible to utilize rechargeable AA-type batteries (NiMH or NiCd).
However, rechargeable batteries have higher self-discharge and less cell tension,
causing shorter operation time. Therefore we do not recommend to use
rechargeable batteries.
8