Top Innovations MCCULLOCH MC1246 - Manual (Page 6)

6 Top Innovations, Inc.
P
ORTABLE
P
OWER
S
TEAM
C
LEANER
P
RODUCT
I
NFORMATION
• The Boiler Cap (1) securely covers the Boiler Fill Hole, preventing hot steam from escaping the
Boiler. The Boiler Cap must be unscrewed and removed (only when the Boiler is completely
cooled) in order to fill the Boiler with water.
• The Boiler Fill Hole (1
A
) is the inlet through which water is poured into the Boiler.
• The Boiler (1
B
) is the internal heating chamber where water is converted into steam. Some empty
space inside the Boiler is required for this conversion process, so the recommended maximum
water capacity should not be exceeded when filling with water.
• The Heating Indicator Light (2) illuminates to indicate that the unit is powered on and is heating,
then deactivates when the unit is ready to begin steaming.
• The Strap Tabs (3) serve as the connection points for hooking the Shoulder Strap onto the unit.
• The Main Nozzle (4) releases a flow of hot, penetrating steam when the Steam Trigger is pressed.
The Steam Jet Nozzle and Extension Wands connect directly to the Main Nozzle.
• The Steam Trigger (5) controls the flow of steam from the Main Nozzle. For a continuous flow of
steam, the Trigger can either be held down manually or locked down with the Steam Lock Switch.
CAUTION: Do not direct steam towards surfaces that may be damaged by moisture
or extreme heat.
• The Steam Lock Switch (5
A
) locks down the Steam Trigger for a continuous flow of steam.
• The Steam Hose (6) directs steam from the Boiler to the Main Nozzle, and is designed to remain
flexible while safely containing the steam.
• The Extension Wands (7) connect to the Main Nozzle, allowing easy cleaning of floors, ceilings and
other hard-to-reach places.
• The Utility Head (8) connects to the Steam Jet Nozzle and is designed for cleaning floors and other
large surfaces. The Utility Head includes three modes of operation, including brush, squeegee, and
neutral (flat). Refer to Page 8 for details.
• The Cloth Cover (9) attaches to the Utility Head for cleaning tile, hardwood and
other hard surface floors while minimizing any potential heat and moisture damage.
• The Shoulder Strap (10) hooks onto the two Strap Tabs, allowing the unit to be conveniently toted
hands-free while cleaning.
• The Steam Jet Nozzle (11) connects to either the Main Nozzle or the Extension Wands, and is
designed to safely focus the flow of steam. The Utility Head, Brushes and Nozzle Tip all connect to
the Steam Jet Nozzle.
• The Nylon Brush (12) connects to the Steam Jet Nozzle and is designed to work with steam to
remove stubborn stains and grime. It is intended for use on tile, grout, carpet, upholstery, and any
other surface that will not be scratched or damaged by the nylon bristles.
• The Brass Brush (13) connects to the Steam Jet Nozzle and is designed to work with steam to
remove stubborn stains and grime. It is intended for use on BBQ grills, oven racks, automobile
engines & wheels, shop tools and other hard metal surfaces
NOTE: Some delicate surfaces, such as stainless steel, may be scratched or damaged by the
brass bristles. Use careful judgement when deciding what surface to clean with the Brass
Brush. If you are unsure if a surface will be damaged, it is recommended that you test a small
inconspicuous spot before proceeding.
• The Nozzle Tip (14) connects to the Steam Jet Nozzle and is designed to finely focus the flow of
steam. It is recommended to always use the Nozzle Tip when not using either of the Brushes or the
Utility Head with the Steam Jet Nozzle.
• The Measuring Cup (15) holds 16 oz. (500 ml.), and is provided to assist in easily and consistently
filling the Boiler with the optimum amount of water (33 oz. / 976 ml.).