Top Innovations MCCULLOCH MC1246 - Manual (Page 8)

8 Top Innovations, Inc.
A
SSEMBLING THE
P
ORTABLE
P
OWER
S
TEAM
C
LEANER
CONNECTING THE UTILITY HEAD
1. Align Steam Jet Nozzle and Utility Head as shown (FIGURE 3-A). Flat edge of Nozzle
will align with peg inside of Head connection.
2. Slide Steam Jet Nozzle into Utility Head, pushing Nozzle in as far as it will go to make
sure it is in proper position (FIGURE 3-B).
3. Rotate Steam Jet Nozzle one half turn (180º) to secure it to Utility Head (FIGURE 3-C).
NOTE: Steam Jet Nozzle will NOT lock into position, and can still be freely rotated.
However, it will not disconnect from Utility Head unless turned back a full 180º.
4. Utility Head has three modes of operation, depending on position of levers:
• Forward Position (FIGURE 3-D) - lowers brush bristles for use on carpeting or
upholstery.
• Neutral (Middle) Position (FIGURE 3-E) - for use on hardwood, linoleum or tile
surfaces. Make sure to attach Cloth Cover when mopping floors.
• Back Position (FIGURE 3-F) - lowers squeegee for use on smooth surfaces such as
windows or mirrors.
A
B
FIGURE 3
D E F
Mop Squeegee Brush
C
FLAT EDGE