Teledyne C-2000 - Manual (Page 48)

NOTE 1: Credit Billing is not applicable to Analog SATCOM systems configured
for “Handset Mode”.
NOTE 2: The MagnaStar will automatically reformat all of the 7 dialing formats
listed above into the format “00” + Country Code + City Code +
Number before sending the dialed number to the Satellite Data Unit
(SDU). A Country Code of “1” (U.S./Canada) is sent to the SDU if a
Country Code is not entered by the user.
NOTE 3: The current link is displayed on the top of the “Main” menu in inverse
video. To switch to an alternate link simply press the
“6” key until the desired available link is displayed
on the top of the menu.
NOTE 4: To setup a “TDD” call you may press “5” whether
or not it is displayed.
37
(Rev. 8/04)
®
Voice — —>1
Inplane —>2
FAX — —>3
Modem —>4
Air-Gnd —>6
HF Radio – >7
Aircalls —>8
Setup — —>9
Operator —>0
Spd Dial —>*
Satcom