Topcom FIDELITY SMS - Manual (Page 11)

Topcom Fidelity SMS 11
ENGLISH
a. Setting the Service Center number for outgoing SMS.
• Press the Menu button .
• Use the scroll switch to select the ‘Setting’.
• Press OK
• Use the scroll switch to select ‘Nr. SMS Out’
• Press OK
• Enter the SC number received from the telephone operator
Wrong entered digits can be erased by pressing the delete key .
• Press OK to confirm
• Press the Escape button twice to leave the menu.
b. Setting the Service Center number for incomming SMS.
• Press the Menu button .
• Use the scroll switch to select the ‘Setting’.
• Press OK
• Use the scroll switch to select ‘Nr. SMS In’
• Press OK
• Enter the SC number received from the telephone operator
Wrong entered digits can be erased by pressing the delete key .
• Press OK to confirm
• Press the Escape button twice to leave the menu.
c. Setting the Terminal Number for Incomming SMS.
• Press the Menu button .
• Use the scroll switch to select the ‘Setting’.
• Press OK
• Use the scroll switch to select ‘Terminal Number’
• Press OK
• Use the scroll switch to select the desired Terminal number or enter the number with the Keypad. (Select ‘-’ by
pressing the delete key
, when the terminal number is not supported by your network operator)
• Press OK to confirm
• Press the Escape button twice to leave the menu.
d. Setting the Deliver Mode Identifier for Outgoing SMS.
• Press the Menu button .
• Use the scroll switch to select the ‘Setting’.
• Press OK
• Use the scroll switch to select ‘DMI setting’
• Press OK
• Use the scroll switch to select the desired Terminal number or enter the number with the Keypad. (Select ‘-’ by
pressing the delete key
, when the Delivery Mode Identifier is not supported by your network operator)
• Press OK to confirm
• Press the Escape button twice to leave the menu.
9.2.2 Sending Short Messages
•
Press the SMS button
• Use the scroll switch to select ‘Write Message’.
• Press OK
• Enter the Short Message by using the Alphanumerical keypad (see 7.1)
• Press OK
• Use the scroll switch to select the ‘Send SMS?’.
• Press OK
• Enter the desired telephone number.
In case you want to reach a specific Terminal Number, you have to add the Terminal number of the
receiver after the telephone number (Telephonenumber + Terminal number).
• Press OK, the display shows ‘ Send?’
• Press OK to confirm. Wait until the display indicates that the message has been sended.
You can leave the menu at any time by pressing the Escape button .
HL_FidelitySMS.book Page 11 Monday, August 4, 2003 3:38 PM