Topcom FIDELITY SMS - Manual (Page 14)

14 Topcom Fidelity SMS
• Press OK
• Use the scroll switch to select ‘Nr. SMS Out’
• Press OK
• Enter the SC number received from the telephone operator
• Press OK to confirm
• Press the Escape button twice to leave the menu.
b. Setting the Service Center number for incomming SMS.
• Press the Menu button .
• Use the scroll switch to select the ‘Setting’.
• Press OK
• Use the scroll switch to select ‘Nr. SMS In’
• Press OK
• Enter the SC number received from the telephone operator
• Press OK to confirm
• Press the Escape button twice to leave the menu.
c. Setting the Terminal Number for Incomming SMS.
• Press the Menu button .
• Use the scroll switch to select the ‘Setting’.
• Press OK
• Use the scroll switch to select ‘Terminal Number’
• Press OK
• Enter the desired Terminal Number (1-9)
• Press OK to confirm
• Press the Escape button twice to leave the menu.
d. Dedicating a password to a personal mailbox and setting the Public Key
• Press the Menu button
• Use the scroll switch to select the ‘Setting’.
• Press OK
• Use the scroll switch to select ‘Password’
• Press OK
• Use the scroll switch to select the Personal Mailbox (1-3)
• Enter the old Password (default = 0000)
• Enter the new Password
• Press OK to confirm
• Enter the Public key using the alphanumerical keypad.
• Press OK to confirm
• Press the Escape button twice to leave the menu.
9.3.2 Sending SMS Messages
•
Press the SMS button
• Select the mailbox using the Scroll switch.
• Press OK
• Enter the password when you have selected a personal mailbox (see 9.3.1.d)
The Public mailbox is not password protected.
•
Use the scroll switch to select ‘Write Message’.
• Press OK
• Enter the Short Message by using the Alphanumerical keypad (see 7.1)
• Press OK
a. Sending an SMS message
• Use the scroll switch to select ‘Send SMS?’.
• Press OK
• Enter the telephone number
• Press OK
• To sent a message to a Password ‘Public Key’ protected mailbox, enter the Public Key (5 alphanumerical
characters) and press OK to confirm
The received can only read the message after entering the identical code.
•
To sent a message without Public Key, press OK without entering any digit.
• Enter the receivers Terminal Number (1-9)
• Press OK, the display indicates ‘Notify (Y/N)’
HL_FidelitySMS.book Page 14 Monday, August 4, 2003 3:38 PM