Tungsten Affinity TUNGSTUN T3 - Manual (Page 372)

Appendix B Frequently Asked Questions
358
I get a warning message
telling me my handheld
memory is full. ■ Purge records from Calendar and Tasks. This deletes Tasks
items and past Calendar events from the memory of your
handheld. See
“Purging records” in Chapter 4 . You must
perform a HotSync operation to recover the memory.
■ Delete unused memos, photos, and records. If necessary,
you can save these records. See
“Deleting records” in
Chapter 4 . You must perform a HotSync operation to
recover the memory.
■
If you have installed additional applications on your
handheld, remove them to recover memory.
See
“Removing applications” in Chapter 4 .
My handheld keeps turning
itself off. Your handheld is designed to turn itself off after a period of
inactivity. This period can be set at 30 seconds or at one, two,
or three minutes. Check the Auto-off after setting on the Power
Preferences screen. See
“Power Preferences” in Chapter 21 .
My handheld is not making
any sounds. Check the System, Alarm, and Game Sound settings.
See
“Sounds & Alerts Preferences” in Chapter 21 .
My handheld’s indicator light
is not blinking when alarms
occur. Check the Alarm indicator light setting. See “Alarm LED and
Alarm Vibrate settings” in Chapter 21 .
My handheld does not vibrate
when alarms occur. Check the Alarm Vibrate setting. See “Alarm LED and Alarm
Vibrate settings” in Chapter 21 .
My handheld has frozen.
■
If a network connection was improperly terminated, your
handheld may appear to be frozen for up to 30 seconds. If
it is still frozen after 30 seconds, perform a soft reset.
■ Perform a soft reset. See “Resetting your handheld” in
Appendix A .
■
If your handheld continues to freeze after a soft reset, check
your third-party applications for incompatible
applications. See
“Problems with incompatible
applications” later in this chapter.