Tally Genicom 9316 - Manual (Page 27)

About Media 21
What type and amount of media can I load?
Note
Do not allow media to go above the fill limit mark inside the tray or the
media may not be fed correctly.
Media Storage
Keep media on a flat, level surface in its original wrapper until it is time to
load it.
If media has been removed from its wrapper, place it in its original packaging
and store in a cool, dark place.
When storing media, avoid
Moisture, excess humidity
Keep media between 30% to 65% relative humidity. Toner does not
adhere well to moist or wet paper
On the other hand, media that has been stored for a long time without
staying in its packaging may dry up too much and also cause jamming.
Direct sunlight
Excess heat (up to 35°C/95°F)
Dust
Leaning against other objects or placed in an upright position
Before purchasing a large quantity or special media, do a trial printing with
the same media and check the print quality.
Media Source/Maximum Amount Input Capacity
Media Type Tray 1
Plain Paper 60–90 g/m 2 (16–24 lb) 150 sheets
Special Media Envelopes 10 sheets
Label sheets 10 sheets
Letter head 10 sheets
Postcards (Japanese Size) 50 sheets (first face)
20 sheets (second face)
Thick paper 91–163 g/m 2 (24–90 lb) 10 sheets
Transparencies 5 sheets