Tally Genicom 9316 - Manual (Page 34)

Printing on Media 28
Are precut
Use label sheets that are
Recommended for laser printers
1
In the printer driver (Setup tab/Media Type option), select Thick Paper.
2
Select the size of the label (Paper tab/Original Document Size option).
3
Load the label media lengthwise and printing-side up in Tray 1.
4
Adjust the paper guides to the width of the label media.
Note
Improperly adjusted guides may cause poor print quality, media
jams, or printer damage.
5
Print the labels.
How do I load and print postcards?
Do not use postcards that are
Coated
Warped or bent
Designed for inkjet printers
Multicolored
Preprinted or multicolored (may result in printer jamming)
Use postcards that are
Postcards (100
×
148 mm/3.9
×
5.8 in.) recommended for laser printers
1
In the printer driver (Setup tab/Media Type option), select Postcard.
2
Select the size of the postcard (Paper tab/Original Document Size
option).
Full page labels
(uncut)
Do not use OK to use