Toshiba SG-1700 - Manual (Page 17)

16
2. DIALING A STORED NUMBER
q Pick up the handset and press TALK .
The TALK/BATT LOW LED lights.
w Press MEM .
e Enter the memory address (0 to 9).
The stored number will be dialed.
Note
If you enter a memory address which does not have any stored number, error beeps sound.
3. ERASING A STORED TELEPHONE NUMBER
q Pick up the handset. (Do not press the TALK button.)
w Press the MEM button twice.
e Enter the memory address button (0 to 9) you wish to erase.
When erasing is completed, you will hear a long beep.
4. INSERTING A PAUSE IN MEMORY
Use PAUSE to make an outgoing call through a PBX or long distance.
Each time you press PAUSE , a pause of about two seconds is inserted
during the dialing sequence. If more than two seconds are needed,
press
PAUSE twice.
EXAMPLE: To store “0 PAUSE 1234567890” in memory address 4,
press:
MEM 0 PAUSE 1 2 3 4 5 6 7 8 9 WX 0 MEM 4
.
5. CHAIN DIALING
Combining ordinary dialing and memory dialing, you can dial a long
telephone number with less steps.
EXAMPLE: Divide the number into two portions and store the first portion
in memory address 1 and the second portion in memory address 2.
When you call, press following buttons;
TALK MEM 1 MEM
2