Document Outline

• INTRODUCTION
  • TYPE OF SERVICE
  • ABOUT THE TELEPHONE CONSUMER PROTECTION ACT OF 1991
  • Important safety information
  • FCC Notice to users:
• TABLE OF CONTENTS
• QUICK REFERENCE GUIDE
• LIST OF FAX FUNCTIONS
  • SELECTING SETTINGS FOR THE FUNCTION
• INSTALLATION
  • CONNECTING THE TELEPHONE LINE CORD
    • ABOUT THE OPERATION MANUALS
    • Facsimile Expansion Kit Operation Manual (this manual)
    • Operation Manual (for Basic Function)
    • Online Manual (on the CD-ROM)
• FINAL PREPARATIONS
  • CONNECTING OTHER DEVICES
    • Comments:
• INITIAL SETTINGS
• A LOOK AT THE FAX OPERATION PANEL
• ABOUT THE LIQUID CRYSTAL DISPLAY
• ADJUSTING THE RINGING VOLUME
• SETTING THE LENGTH OF ALARM BEEPS
• ADJUSTING THE ALARM BEEP VOLUME
• FAX SETUP
  • HOW TO ENTER CHARACTERS
  • ENTERING YOUR NAME AND FAX NUMBER
  • SETTING THE DATE AND TIME
    • Daylight Saving Time Setting
  • SELECTING THE TRANSMISSION MODE
    • Memory transmission (the MEMORY indicator is lit)
    • Direct transmission (the MEMORY indicator is off)
  • SELECTING THE RECEPTION MODE
  • SETTING THE NUMBER OF RINGS FOR AUTO RECEPTION
  • SETTING THE NUMBER OF RINGS FOR MANUAL RECEPTION
  • SELECTING THE RECEPTION PAPER SIZE
  • SETTING THE TRAY SELECTION (when the 250-sheet paper feed unit is installed)
  • SETTING THE DIAL MODE
  • SETTING THE NUMBER OF RECALL TIMES
    • When the line is busy
    • When a communication error occurs
  • SETTING THE RECALL INTERVAL
    • When the line is busy
    • When a communication error occurs
  • SETTING THE INDEX FUNCTION
  • SETTING RESOLUTION PRIORITY
  • SETTING UP THE MACHINE FOR USE WITH A PC MODEM
  • USING THE REMOTE RECEPTION FUNCTION
  • DISTINCTIVE RINGING
  • STORING NUMBERS FOR AUTOMATIC DIALING
    • Storing numbers
  • STORING NUMBERS UNDER GROUP KEYS
• USING THE MACHINE WITH AN ANSWERING MACHINE
  • QUIET DETECT TIME
    • If Quiet Detect Time is not working properly...
  • ANSWERING MACHINE BACKUP
• CHOOSING SUITABLE MEDIA
  • SIZE AND WEIGHT
    • When using the ADF/RADF
    • When using the document glass
  • UNSUITABLE ORIGINALS
• HOW TO USE THE FAX FUNCTION
  • SETTING THE ORIGINAL
• OPTIONAL TRANSMISSION SETTINGS
  • ORIGINAL SIZE
  • RESOLUTION
  • CONTRAST
  • COVER SHEET
  • MESSAGE FUNCTION
  • TWO-SIDED ORIGINAL TRANSMISSION FUNCTION (when an RADF is installed)
• DIALING AND TRANSMITTING
  • DIRECT KEYPAD DIALING
  • RAPID KEY DIALING
  • SPEED DIALING
  • CHAIN DIALING
  • NORMAL DIALING USING THE [SPEAKER] KEY
  • USING THE SEARCH KEY
  • REDIALING
• IF THE MEMORY BECOMES FULL WHILE SCANNING AN ORIGINAL
• RECEIVING FAXES
  • USING AUTO MODE
  • USING MAN. MODE
  • USING A.M. MODE
• OPTIONAL RECEPTION SETTINGS
  • TWO-SIDED RECEPTION (e-STUDIO162D/151D only)
  • RECEIVE REDUCE
• WHEN USING MANUAL SENDING AND RECEIVING
• SPECIAL FUNCTIONS
  • Substitute Reception into Memory
• DATA TRANSFER
• TRANSMISSION RESERVATION
• BROADCASTING
  • Broadcasting using a Group key
• POLLING
  • POLLING
  • SERIAL POLLING
  • POLLING TRANSMISSION (MEMORY POLLING)
    • Setting up polling transmission:
    • Adding a original to polling memory:
    • Deleting originals from polling memory:
  • RESTRICTING POLLING MACHINES (POLLING SECURITY)
• TIMER OPERATIONS
  • CANCELING A TIMER TRANSMISSION JOB
• ANTI JUNK FAX
• OPERATION IN COPY, PRINTER, SCANNER, AND FAX MODES
• TROUBLESHOOTING
  • 1. TIMER LIST:
  • 2. ACTIVITY REPORT:
  • 3. TELEPHONE # LIST:
  • 4. GROUP LIST:
  • 5. PASSCODE LIST:
  • 6. JUNK FAX # LIST:
  • 7. USER PROGRAM LIST:
  • ACTIVITY REPORT AUTO LISTING
  • PRINTING TRANSACTION REPORTS
• TROUBLESHOOTING
• MESSAGES AND SIGNALS
  • DISPLAY MESSAGES
  • AUDIBLE SIGNALS
• APPENDIX
• INDEX
  • INDEX BY PURPOSE
  • MEMO
  • MEMO
  • MEMO
  • NOTICE FOR USERS IN CANADA
  • AVIS POUR NOS UTILISATEURS AU CANADA
  • NOTICE FOR USERS IN CANADA
  • AVIS POUR NOS UTILISATEURS AU CANADA