Toshiba 151D User Manual
Page 19
15
INITIAL SETTINGS
2
[REPORT] key
Press this key to print out a report of a fax
transaction and also when receiving a confidential
fax.
[SPEAKER] key
Press this key to begin manual dialing. (To close
the line, press the [SPEAKER] key again.)
[2-SIDED TX] key (e-STUDIO162D/151D only)
Press this key to fax a two-sided original.
[MODE SELECT] key / Mode indicators
Press this key to select the mode. The indicator of
the selected mode lights (copy, printer, scanner,
fax mode indicators).
ADF/RADF indicator
This lights up when an original is placed in the
ADF/RADF.
Error indicator
This lights steadily or blinks when a paper misfeed
or other error occurs.
Tray location indicator
Indicates the selected paper tray. The indicator
blinks when the tray is out of paper or is not
closed.
[MENU] key
Press this key to configure a user program.
[
] key (
), [
] key (
), [ENTER] key
Press the [
] key (
) or [
] key (
) to
select an item in a function setting menu.
Press the [ENTER] key to enter a selection.
[ ] key
Press this key to enter symbols during a name
storing procedure.
Press the " " key to change from pulse dialing to
tone dialing mode.
Numeric keys
Press these keys to dial numbers, and enter
numbers and letters during number/name storing
procedures.
[#] key
Press this key to enter symbols during a name
storing procedure. The [#] key scrolls through
symbols in the opposite direction of the [ ] key.
When dialing, press this key after you are finished
scanning originals into memory from the document
glass.
[START] key (
)/ indicator
Used for the following:
• To begin sending a fax.
• Reading an original into memory from the
document glass.
• Manually receiving a fax.
• Entering and setting information.
Power save indicator
This lights up when the power save function is
activated.
28
7
8
27
26
24
25
23
9
22
15
16
17
18
19
20
21
22
23
24
25
26
27
28