Transfer a call – TANDBERG Media Processing System MPS 200 User Manual
Page 71
D 13373.08
NOVEMBER 2007
MPS
TANDBERG
MPS
ADMINISTRATOR GUIDE
GW Overview > Manage a Gateway Call
Actions -
When a call is active the Administrator or Operator can
Disconnect
the call, or
Transfer
the call from one IP endpoint to another.
Transfer a Gateway Call
Transfer a Call
Identify which call to transfer from the
1.
Gate-
way Overview
page.
Press the
2.
Transfer Call
actions button.
A
3.
H.323 Call Transfer
window will be shown.
Select a
4.
H.323
entry from the Phone Book or
enter an
IP address
or
E.164
alias into the
Manual Dial field.
Press
•
Transfer Call
button to initiate the
transfer
Press the Cancel button to discard the
•
transfer.
If the transfer fails the call will be discon-
nected.
!
71
Introduction
Quick
Setup
System
Status
System
Configuration
Installation
Gateway
Configuration
MCU
Configuration
Technical
Descriptions
Appendices
Main
Using
the MPS